NUTRITION
PRODUCTIVITY AND SUSTAINABLE CROPS
SOLDENSO
NPK fertilizer with trace elements
TECHNICAL DATA SHEET
Gel for formulation and foliar application and fertigation NICKEL FREE
Sol Denso is a formulated nutritional product. It is not a simple set of raw materials like most solid NPK fertilizers. All Sol Denso nutrients have uniform and simultaneous solubility during use. They do not settle in the storage containers of the nutrient solution. Solid NPK fertilizers, on the other hand, are produced with a set of raw materials that, due to the variable granulometry, do not dilute the nutrients uniformly because the smaller grains dissolve first. The conductivity and salinity index remain very low, so the soil does not receive unwanted salt concentrations.
CARATTERISTICS
Neutral pH. Unlike most foliar liquids, which are highly acidic or alkaline, SOL DENSO can be used in higher doses, since it is not aggressive for the cells that form the stomata.
It is more convenient for the farmer to dose by volume rather than by weight. It is the best solution: fast and easy to use. It allows for greater homogeneity of liquid dispersion compared to solid products. Guaranteed solubility thanks to the GEL formulation.
Adjuvant effect: if applied together with plant protection products, it promotes their effectiveness. Numerous formulas for different crops and different cultivation phases.
FORMULATIONS:
Sol Denso Yellow
Sol Denso Equal 30-30-30+Te
Sol Denso Equal 27-27-27+Te
Sol Denso Equal 24-24-24+Te
Sol Denso Equal 22-22-22+Te
Sol Denso Equal 20-20-20+Te
Sol Denso Equal 15-15-15+Te
Sol Denso Blue
Sol Denso Blue 40-06-00+Te
Sol Denso Blue 30-10-10+Te
Sol Denso Blue 30-05-05+Te
Sol Denso Blue 28-11-14+Te
Sol Denso Blue 25-06-10+Mg+Te
Sol Denso Blue 40-06-00+Te
Sol Denso Green
Sol Denso Green 16-70-05+Te
Sol Denso Green 16-69-16+Te
Sol Denso Green 12-59-06+Te
Sol Denso Green 16-51-16+Te
Sol Denso Green 14-47-00+Te
Sol Denso Green 13-40-13+Te
Sol Denso Green 08-37-08+Te
Sol Denso Green 20-30-10+Te
Sol Denso Green 10-30-10+Te
Sol Denso Green 00-30-10+Te
Sol Denso Red
Sol Denso Red 08-08-60+Te
Sol Denso Red 04-40-55+Te
Sol Denso Red 05-45-50+Mg+Te
Sol Denso Red 00-45-50+Te
Sol Denso Red 01-00-50
Sol Denso Red 11-00-46+Te
Sol Denso Red 13-15-44+Mg+Te
Sol Denso Red 12-12-44+Mg+Te
Sol Denso Red 12-05-42+Te
Sol Denso Red 05-05-42+Te
Sol Denso Red 10-05-36+Te
SOLDENSO Specials+
npk fertilizer with trace elements
TECHNICAL DATA SHEET
SOL DENSO + FULVIC ACIDS
Sol Denso Equal 20-20-20+5Aa
Sol Denso Blue 45-00-00+5Aa
Sol Denso Green 10-50-10+5Aa
Sol Denso Red 15-10-30+5Aa
SOL DENSO + AMINO ACIDS
Sol Denso Blue 05-03-05+35Fa
Sol Denso Red 02-00-12+63Fa
SOL DENSO + MICRONUTRIENT
Sol Denso Blue 14-07-14+14CaO+TE
Sol Denso Equal 20-20-20+4,7MgO+TE
Sol Denso Equal 25-25-25+3,8MgO+TE
Sol Denso Green 12-65-05+0,5MgO+TE
Sol Denso Red 09-09-39+6,7MgO+TE
Sol Denso Red 12-12-44+0,5MgO+TE
Sol Denso Red 18-11-59+2,0MgO+TE
Sol Denso Blue 14-00-08+17CaO+3,6MgO+TE
Sol Denso Equal 20-20-20+20Seaweed+TE
Sol Denso Red 03-10-15+MgO+1,5 Chitosan
SOL ACID 8-24-24
Compound Mineral Fertilizer
TECHNICAL DATA SHEET
NPK fertilizer 8-24-24 with iron (Fe) (EDTA), manganese (Mn) (EDTA) and zinc (Zn) (EDTA) with low chlorine content – obtained by mixing. For horticultural use.
COMPOSITION
Total Nitrogen (N) 8%
Nitric Nitrogen (N) 32%
Ammoniacal Nitrogen (N) 48%
Phosphorus Pentax (POs) soluble in neutral ammonium citrate and in water 24%
Phosphorus Pentax (P2Os) soluble in water 24%
Potassium Oxide (Kz0) soluble in water 24%
Iron (Fe) soluble in water 0.03%
Iron (Fe) chelated with EDTA 0.03%
Manganese (Mn) soluble in water 001%
Manganese (Mn) chelated with EDTA 001%
Zinc (Zn) soluble in water 001%
Zinc (Zn) chelated with EDTA 001%
pH range that guarantees good stability of the chelated fraction: 4-9
FEATURES
SOL-ACID 8-24-24 is a microcrystalline fertigation product with very pure salts with high and complete solubility, suitable for all crops and in particular for alkaline soils. Its formulation with an acid pH makes nutrients easily assimilable, as it promotes their absorption, stimulating the root and vegetative functions of plants. Its nutritional ratio satisfies the needs of all plants, promoting the coloration of flowers and fruits, anticipating their ripening.
DOSAGES OF USE AND METHOD OF USE
SOL-ACID 8-24-24 is used in two or more fertigations depending on different factors such as: phenological moment and age of the plant, temperature, etc.
Grapevine and kiwi: 5-10 kg/1,000 m*
Citrus and fruit trees: 6-12kg/1,000m.
Horticultural crops: 5-10kg/1,000m°
Floricultural crops: 5-10kg/1,000m°
Industrial crops: 10-15 kg/1,000 m°.
On protected crops (greenhouses, nurseries, seedbeds) the dose must not exceed 5kg/1,000 m° and treatments will be carried out during the cooler hours of the day.
SOL ACID 9-18-27
Compound Mineral Fertilizer
TECHNICAL DATA SHEET
NPK 9-18-27 fertilizer with iron (Fe) edta, manganese (Mn) edta and zinc (Zn) edta with low chlorine content obtained by mixing For horticultural use.
COMPOSITION
Total Nitrogen (N) 9%
Nitric Nitrogen (N) 6%
Ammoniacal Nitrogen (N) 3%
Phosphorus Pentax (POs) soluble in neutral ammonium citrate and in water 18%
Phosphorus Pentax (P2Os) soluble in water 18%
Potassium Oxide (Kz0) soluble in water 27%
Iron (Fe) soluble in water 0.03%
Iron (Fe) chelated with EDTA 0.03%
Manganese (Mn) soluble in water 001%
Manganese (Mn) chelated with EDTA 001%
Zinc (Zn) soluble in water 001%
Zinc (Zn) chelated with EDTA 001%
pH range that guarantees good stability of the chelated fraction: 5-10
CARATTERISTICS
SOL-ACID 9-18-27 is a microcrystalline fertigation product with very pure salts with high and complete solubility, suitable for all crops and in particular for alkaline soils. Its formulation with an acid pH makes nutrients easily assimilated, the constant use of the formulation stimulates the radical and vegetative functions of plants. Its nutritional ratio 1:2:3 favors in the plant a reduction of the vegetative period, a more intense coloration of the flowers and fruits, anticipating their ripening.
DOSAGES OF USE AND METHOD OF USE
SOL-ACID 9-18-27 is used in two or more fertigations depending on different factors such as: phenological moment and age of the plant, temperature, etc.
Grapevines and kiwifruit: 5-10 kg/1,000 m*
Citrus and fruit trees: 6-12kg/1,000m.
Horticultural crops: 5-10kg/1,000m°
Floricultural crops: 5-10kg/1,000m°
Industrial crops: 10-15 kg/1,000 m°
On protected crops (greenhouses, nurseries, seedbeds) the dose must not exceed 5kg/1,000 m° and treatments will be carried out during the cooler hours of the day.
SOL ACID 10-20-30
Compound Mineral Fertilizer
TECHNICAL DATA SHEET
NPK 10-20-30 fertilizer with iron (Fe) edta, manganese (Mn) edta and zinc (Zn) edta with low chlorine content obtained by mixing. For horticultural use.
COMPOSITION
Total Nitrogen (N) 10%
Nitric Nitrogen (N) 7%
Ammoniacal Nitrogen (N) 3%
Phosphorus Pentax (POs) soluble in neutral ammonium citrate and in water 20%
Phosphorus Pentax (P2Os) soluble in water 20%
Potassium Oxide (Kz0) soluble in water 30%
Iron (Fe) soluble in water 0.03%
Iron (Fe) chelated with EDTA 0.03%
Manganese (Mn) soluble in water 001%
Manganese (Mn) chelated with EDTA 001%
Zinc (Zn) soluble in water 001%
Zinc (Zn) chelated with EDTA 001%
pH range that guarantees good stability of the chelated fraction: 5-10
CARATTERISTICS
SOL-ACID 10-20-30 is a microcrystalline fertigation product with very pure salts with high and complete solubility, suitable for all crops and in particular for alkaline soils. Its formulation with an acid pH makes nutrients easily assimilated, the constant use of the formulation stimulates the radical and vegetative functions of plants. Its nutritional ratio 1:2:3 favors a reduction in the vegetative period in the plant, a more intense coloration of flowers and fruits, anticipating their ripening.
DOSAGES OF USE AND METHOD OF USE
SOL-ACID 10-20-30 is used in two or more fertigations depending on different factors such as: phenological moment and age of the plant, temperature, etc.
Grapevines and kiwifruit: 5-10 kg/1,000 m*
Citrus and fruit trees: 6-12kg/1,000m.
Horticultural crops: 5-10kg/1,000m°
Floricultural crops: 5-10kg/1,000m°
Industrial crops: 10-15 kg/1,000 m°
On protected crops (greenhouses, nurseries, seedbeds) the dose must not exceed 5kg/1,000 m° and treatments will be carried out during the cooler hours of the day.
SOL ACID 10-40-10
Compound Mineral Fertilizer
TECHNICAL DATA SHEET
NPK 10-20-30 fertilizer with iron (Fe) edta, manganese (Mn) edta and zinc (Zn) edta with low chlorine content obtained by mixing. For horticultural use.
COMPOSITION
Total Nitrogen (N) 10%
Nitric Nitrogen (N) 3.8%
Ammoniacal Nitrogen (N) 6.2%
Phosphorus Pentax (POs) soluble in neutral ammonium citrate and in water 40%
Phosphorus Pentax (P2Os) soluble in water 40%
Potassium Oxide (Kz0) soluble in water 10%
Iron (Fe) soluble in water 0.03%
Iron (Fe) chelated with EDTA 0.03%
Manganese (Mn) soluble in water 001%
Manganese (Mn) chelated with EDTA 001%
Zinc (Zn) soluble in water 001%
Zinc (Zn) chelated with EDTA 001%
pH range that guarantees good stability of the chelated fraction: 5-10
CARATTERISTICS
SOL-ACID 10-40-10 is a microcrystalline fertigation produced with very pure salts with high and complete solubility, suitable for all crops and in particular for alkaline soils. Its formulation with an acid pH makes the nutrients easily assimilated, the constant use of the formulation stimulates the radical and vegetative functions of the plants. Its nutritional ratio 1:2:3 favors in the plant a reduction of the vegetative period, a more intense coloration of the flowers and fruits, anticipating their ripening.
DOSAGES OF USE AND METHOD OF USE
SOL-ACID 10-40-10 is used in two or more fertigations depending on different factors such as: phenological moment and age of the plant, temperature, etc.
Grapevines and kiwifruit: 5-10 kg/1,000 m*
Citrus and fruit trees: 6-12kg/1,000m.
Horticultural crops: 5-10kg/1,000m°
Floricultural crops: 5-10kg/1,000m°
Industrial crops: 10-15 kg/1,000 m°.
On protected crops (greenhouses, nurseries, seedbeds) the dose must not exceed 5kg/1,000 m° and treatments will be carried out during the cooler hours of the day.
SOL ACID 15-5-30
Compound Mineral Fertilizer
TECHNICAL DATA SHEET
NPK 15-5-30 fertilizer with iron (Fe) edta, manganese (Mn) edta and zinc (Zn) edta with low chlorine content obtained by mixing. For horticultural use.
COMPOSITION
Total Nitrogen (N) 15%
Nitric Nitrogen (N) 8.4%
Ammoniacal Nitrogen (N) 6.6%
Phosphorus Pentax (POs) soluble in neutral ammonium citrate and in water 5%
Phosphorus Pentax (P2Os) soluble in water 5%
Potassium Oxide (Kz0) soluble in water 30%
Iron (Fe) soluble in water 0.03%
Iron (Fe) chelated with EDTA 0.03%
Manganese (Mn) soluble in water 001%
Manganese (Mn) chelated with EDTA 001%
Zinc (Zn) soluble in water 001%
Zinc (Zn) chelated with EDTA 001%
pH range that guarantees good stability of the chelated fraction: 4-9.
CHARACTERISTICS
SOL-ACID 15-5-30 is a microcrystalline fertigation produced with very pure salts with high and complete solubility, suitable for all crops and in particular for alkaline soils. Its acid pH formulation makes nutrients easily assimilable, as it promotes their absorption, stimulating the root and vegetative functions of plants. Its nutritional ratio satisfies the needs of all plants, promoting the coloration of flowers and fruits, anticipating their ripening.
DOSAGES OF USE AND METHOD OF USE
SOL-ACID 15-5-30 is used in two or more fertigations depending on different factors such as: phenological moment and age of the plant, temperature, etc.
Grapevines and kiwifruit: 5-10 kg/1,000 m*
Citrus and fruit trees: 6-12kg/1,000m.
Horticultural crops: 5-10kg/1,000m°
Floricultural crops: 5-10kg/1,000m°
Industrial crops: 10-15 kg/1,000 m°.
On protected crops (greenhouses, nurseries, seedbeds) the dose must not exceed 5kg/1,000 m° and treatments will be carried out during the cooler hours of the day.
SOL ACID 20-20-20
Compound Mineral Fertilizer
TECHNICAL DATA SHEET
NPK 20-20-20 fertilizer with iron (Fe) edta, manganese (Mn) edta and zinc (Zn) edta with low chlorine content obtained by mixing. For horticultural use.
COMPOSITION
Total Nitrogen (N) 20.00%
Nitric Nitrogen (N) 5.60%
Ammoniacal Nitrogen (N) 4.0%
Ureic Nitrogen (N) 10.40%
Phosphorus Pentax (POs) soluble in neutral ammonium citrate and in water 20.00%
Phosphorus Pentax (P2Os) soluble in water 20.00%
Potassium Oxide (Kz0) soluble in water 20.00%
Iron (Fe) soluble in water 0.03%
Iron (Fe) chelated with EDTA 0.03%
Manganese (Mn) soluble in water 001%
Manganese (Mn) chelated with EDTA 001%
Zinc (Zn) soluble in water 001%
Zinc (Zn) chelated with EDTA 001%
pH range that guarantees good stability of the chelated fraction: 4-8.
CARATTERISTICS
SOL-ACID 20-20-20 is a microcrystalline fertigation produced with very pure salts with high and complete solubility, suitable for all crops and in particular for alkaline soils. Its acid pH formulation makes nutrients easily assimilable, as it promotes their absorption, stimulating the root and vegetative functions of plants. Its nutritional ratio satisfies the needs of all plants, promoting the coloration of flowers and fruits, anticipating their ripening
DOSAGES OF USE AND METHOD OF USE
SOL-ACID 20-20-20 is used in two or more fertigations depending on different factors such as: phenological moment and age of the plant, temperature, etc.
Grapevine and kiwi: 100-150 kg/ha.
Citrus and fruit trees: 120-160 kg/ha.
Vegetable crops: 50-80 kg/ha.
Flower crops: 50-80 kg/ha.
Industrial crops: 150-200 kg/ha.
On protected crops (greenhouses, nurseries, seedbeds) the dose must not exceed 5kg/1,000 m° and treatments will be carried out during the cooler hours of the day.
SOL TEC 21
Soluble fertilizer
TECHNICAL DATA SHEET
SOL TEC 21 is a range of special fertilizers with high solubility. It is suitable for all types of crops: fruit trees, horticultural, industrial, in open fields or under greenhouses.
They contain a new DCD fertilizer. That molecule is a nitrification inhibitor, preserving nitrogen in ammonia form.
DCD molecule that naturally blocks the nitrification oxidation process of NH+aNO, allowing crops a higher amount of nutrient absorption.
COMPOSITION
Total Nitrogen (N) 21.0% w/w
Ammoniacal Nitrogen (N) 21.0% w/w
Sulfur (SO3) 60% w/w
DCD Dicyandiamide 60.0% w/w
Solubility 25kg/200L water
ADVANTAGES OF SOL TEC 21
Improves nitrogen absorption
Reduces nitrogen losses by leaching
Enhances ammonia absorption
Improves phosphorus and microelement absorption
Reduces nitrate contamination in groundwater.
SOL TEC N-MAG
Soluble fertilizer
TECHNICAL DATA SHEET
SOL TEC N-MAGis a range of special fertilizers with high solubility. It is suitable for all types of crops: fruit trees, horticultural, industrial, in open fields or under greenhouses. Increasing the availability of Mg in soils with a deficiency of Mg results in an increase in the quality of agricultural crops, especially when the quality depends on the assimilation of Mg within the plant.
They contain a new fertilizer DCD. That molecule is a nitrification inhibitor, preserving nitrogen in ammonia form.
DCD molecule that naturally blocks the nitrification oxidation process of NH+aNO, allowing crops a higher amount of nutrient absorption.
COMPOSITION
Total Nitrogen (N) 22.0% w/w
Ammoniacal Nitrogen (N) 14.8% w/w
Nitric Nitrogen (NH) 7.2% w/w
Magnesium (MgO) 6.8% w/w
Sulfur (SO3) 30% w/w
DCD Dicyandiamide 30.0% w/w
Solubility 25kg/200L water
ADVANTAGES OF SOL TEC N-MAG
– Improves nitrogen absorption by the crop
– Reduces nitrogen losses by washing
– Enhances ammonia absorption
– Improves magnesium absorption
– Reduces nitrate contamination in groundwater.
GLUTAM ORG
Organic mineral fertilizer
TECHNICAL DATA SHEET
GLUTAM ORG contains humic and fulvic carbon from lignite. It is the ideal product for all crops that can benefit from a significant amount of organic matter. The crops for which it is recommended are both extensive and intensive crops and in particular: horticultural crops, onion, asparagus, etc.; fruit trees, bananas, strawberries, olives, corn, sunflower seeds, potatoes, beets, cereals, etc.
– Facilitates cell division and distension in shoots and increases root growth.
– Releases nutrients blocked by the soil.
– Increases natural resistance to disease.
– Increases chlorophyll synthesis, regulates stomatal opening, increasing sucker fertility.
– Increases the benefits of microbial flora.
– Acts as a water reserve.
– Promotes increased production in adverse conditions
COMPOSITION
Total nitrogen (N) 8.5%
Organic nitrogen (N) 3.0%
Ammoniacal nitrogen (N) 5.5%
Water-soluble potassium oxide (K2O) 5.5%
Water-soluble sulfur trioxide (SO3) 8.0%
Organic carbon (C) of biological origin 30%
Humic and fulvic carbon (C) 10%
Mineral fertilizers: ammonium sulphate, potassium sulphate.
Organic matrices: lignite
GLUTAM ORG
Organic fertilizer NP
TECHNICAL DATA SHEET
Product obtained solely from the following NP+N organic fertilizers “allowed in organic farming”: dried vegetable digestate obtained from mixtures of plant materials subjected to composting or anaerobic fermentation for the production of biogas, algae extract in solid form obtained directly by acid extraction, deriving only from organic or sustainable production in accordance with Annex II, Part II, point 2.4 of Reg. (EU) 2018/848.
-Facilitates cell division and distension in shoots and increases root growth;
-Frees nutrients blocked by the soil;
-Increases natural resistance to disease
-Increases chlorophyll synthesis regulates stomatal opening and increases sucker fertility;
-Increases the benefits of microbial flora;
-Acts as a water reserve;
-Increases production in adverse conditions.
COMPOSITION
Organic nitrogen (N) 7 %
Total sulfur trioxide (P2O5) 3 %
Water-soluble potassium oxide (K2O) 3 %
PERFOSS BIO
Organic mineral fertilizer NP
TECHNICAL DATA SHEET
Organo-Mineral NP fertilizer with high agronomic performance, with hydrolyzed Organic Substance at acid pH, for the maintenance and enrichment of the available Phosphorus supply. Rich in Calcium and soluble Sulphates. Unsurpassed for the basic fertilization of many crops. Stimulates the rooting of herbaceous and arboreal crops creating a prompt “starter” effect. Localizable at sowing.
PERFOSS®BIO is a granular Organo-Mineral NP fertilizer characterized by the presence of a high percentage of Organic Nitrogen and Phosphorus Anhydride soluble in water. The Phosphorus, contained in available form, is closely linked to the Organic Substance and for this reason is protected from the insolubilization caused by the presence of Calcium, Iron, Aluminum in the soil. The hydrolyzed Organic Substance with its organic bonds protects the nutritional elements and determines the gradual release of Nitrogen and Phosphorus to the plants. The greater persistence of Phosphorus in soluble form optimizes the supply of the element to the crops, following their needs in the various stages of development.
The excellent content of assimilable Calcium, Sulphates and soluble microelements including Iron and Zinc, make PERFOSS®BIO a complete fertilizer. The high efficiency of Phosphorus allows to provide doses appropriate to the needs of the crops, providing at the same time excellent results in terms of quality and quantity.
COMPOSITION
Organic nitrogen (N) 3%
Total phosphorus pentoxide (P205) 11% of which 8.5% soluble in water and ammonium citrate – 7.5% soluble in water
Organic carbon (C) of biological origin 10%
Total calcium oxide (CaO) 15% of which 8% soluble in water
Sulphur trioxide 12% of which 8% soluble in water
K NITRATE GEL
Nitrogen and potassium based fertilizer
TECHNICAL DATA SHEET
K Nitrate Gel is a water-soluble emulsion with a high concentration of potassium and nitrogen. Nichel Free. Potassium is a macroelement necessary in large quantities for normal growth and development of the plant.
– Totally water soluble
– 100% plant macronutrients
– Free of chloride, sodium and other elements harmful to plants
– Efficiently absorbed by plants
– Wide range of compatibility with all types of fertilizers and agrochemicals
– Non-volatile, easy to apply, does not release nitrogen into the atmosphere
COMPOSITION
Total Nitrogen (N) 9.6%
Nitric Nitrogen (N) 9.6%
Potassium Oxide (K2O) 32.8%
soluble in water
pH (10% solution): 7-8
Density: 1.55
SITE
Via Firenze, 93
97019 Vittoria (RG) Italy
info@greengrow.it
Contact
Tel +39 0932 290609
Tel +39 0932 290610
Mobile +39 347 7476220